考虑碳配额回购融资的再制造企业生产决策

以资金约束的再制造企业为研究对象，分析了碳配额回购融资下的再制造生产决策问题。分别建立了资金约束下有无碳配额回购融资的再制造生产决策模型，利用Kuhn-Tucker条件得到了不同情形下的最优解，并对两种情形下的最优解进行了比较；通过算例分析初始生产资金、消费者偏好和碳配额回购量对最优产量和利润的影响。研究表明：当初始生产资金较低时，再制造企业选择碳配额回购融资会提高新品产量和总产量；若消费者对再制造品的偏好较高，采取碳配额回购融资提高再制造企业的利润；随着碳配额回购量的提高，再制造企业的利润先提高后降低。另外，存在唯一的最优碳配额回购量使得利润最大。     

基于回转输运试验的煤散料离散元接触参数修正

为获取精确的刮板输送机离散元模拟结果，基于回转输运试验，通过响应面法对煤料的接触参数进行修正.采用Plackett-Burman试验考察接触参数对受力及堆积角的影响，发现煤-钢静摩擦系数、煤-煤摩擦系数具有显著正效应.根据爬坡试验结果，以受力及堆积角为响应值规划Box-Behnken试验，建立受力、堆积角与显著项间的二次回归多项式，以实测数据为目标值求得最佳参数:煤-钢静摩擦系数为0.401，煤-煤静摩擦系数为0.333，煤-煤滚动摩擦系数为0.041.通过不同输运条件下的回转试验验证了参数的准确性，为刮板输送机的离散元研究提供参考.     

浅论气象术语标准研制的问题与对策

为避免气象术语中出现循环定义、定义不协调、定义与术语不匹配、定义重复术语名称或使用代词等问题,运用术语学原理分析,提出研制术语时要注意“语料收集、定义研制、术语分类、辨析关系”的对策建议,这对提高术语研制质量,增强表达交流效果,完善气象标准体系具有重要作用。     

Improving the photocatalytic activity of graphitic carbon nitride by thermal treatment in a high-pressure hydrogen atmosphere

Extending visible light absorption range and suppressing the recombination of photogenerated charge carriers are always important topics in developing efficient solar-driven photocatalysts. In this study, the thermal treatment process at 400 °C in a high-pressure hydrogen atmosphere was applied to modify graphitic carbon nitride. Compared to the normal atmospheric hydrogen treatment process, this process has the merit of producing nitrogen deficient graphitic carbon nitride in high-yield. The optimal photocatalytic activity of modified graphitic carbon nitride was demonstrated by controlling the treatment duration in the hydrogen atmosphere.The changes in the crystal structure, microstructure and optical properties of carbon nitrides were investigated by several characterizations. The relationship between the photocatalytic activity and structures of graphitic carbon nitride was preliminarily established. The results obtained in this study could provide some new ways of improving the activity of graphitic carbon nitride based photocatalyst.     

Forecasting the duration of short‐term deflation episodes

The paper proposes a simulation‐based approach to multistep probabilistic forecasting, applied for predicting the probability and duration of negative inflation. The essence of this approach is in counting runs simulated from a multivariate distribution representing the probabilistic forecasts, which enters the negative inflation regime. The marginal distributions of forecasts are estimated using the series of past forecast errors, and the joint distribution is obtained by a multivariate copula approach. This technique is applied for estimating the probability of negative inflation in China and its expected duration, with the marginal distributions computed by fitting weighted skew‐normal and two‐piece normal distributions to autoregressive moving average ex post forecast errors and using the multivariate Student t copula.     

Blockage of the NLRP3 inflammasome by MCC950 improves anti-tumor immune responses in head and neck squamous cell carcinoma

The NLRP3 inflammasome is a critical innate immune pathway responsible for producing active interleukin (IL)-1β, which is associated with tumor development and immunity. However, the mechanisms regulating the inflammatory microenvironment, tumorigenesis and tumor immunity are unclear. Herein, we show that the NLRP3 inflammasome was over-expressed in human HNSCC tissues and that the IL-1β concentration was increased in the peripheral blood of HNSCC patients. Additionally, elevated NLRP3 inflammasome levels were detected in tumor tissues of Tgfbr1/Pten 2cKO HNSCC mice, and elevated IL-1β levels were detected in the peripheral blood serum, spleen, draining lymph nodes and tumor tissues. Blocking NLRP3 inflammasome activation using MCC950 remarkably reduced IL-1β production in an HNSCC mouse model and reduced the numbers of myeloid-derived suppressor cells (MDSCs), regulatory T cells (Tregs) and tumor-associated macrophages (TAMs). Moreover, inhibiting NLRP3 inflammasome activation increased the numbers of CD4⁺ and CD8⁺ T cells in HNSCC mice. Notably, the numbers of exhausted PD-1⁺ and Tim3⁺ T cells were significantly reduced. A human HNSCC tissue microarray showed that NLRP3 inflammasome expression was correlated with the expression of CD8 and CD4, the Treg marker Foxp3, the MDSC markers CD11b and CD33, and the TAM markers CD68 and CD163, PD-1 and Tim3. Overall, our results demonstrate that the NLRP3 inflammasome/IL-1β pathway promotes tumorigenesis in HNSCC and inactivation of this pathway delays tumor growth, accompanied by decreased immunosuppressive cell accumulation and an increased number of effector T cells. Thus, inhibition of the tumor microenvironment through the NLRP3 inflammasome/IL-1β pathway may provide a novel approach for HNSCC therapy.     

A New Method of Portfolio Optimization Under Cumulative Prospect Theory

In this paper,the portfolio selection problem under Cumulative Prospect Theory(CPT) is investigated and a model of portfolio optimization is presented.This model is solved by coupling scenario generation techniques with a genetic algorithm.Moreover,an Adaptive Real-Coded Genetic Algorithm(ARCGA) is developed to find the optimal solution for the proposed model.Computational results show that the proposed method solves the portfolio selection model and that ARCGA is an effective and stable algorithm.We compare the portfolio choices of CPT investors based on various bootstrap techniques for scenario generation and empirically examine the effect of reference points on investment behavior.     

基于滑移/非滑移异质界面的动压润滑性能优化

合理布置的滑移/非滑移异质界面可以提高流体动压润滑性能,但目前滑移区和非滑移区的组合方式大多采用单一的直线拼接法,没有针对流体润滑摩擦副的各类工况设计出相应的优化方案,为此本文建立了一组离散式二次方程来描述滑移区和非滑移区拼接轨迹,并引入计算域单元的宽长比作为优化变量,分别以液膜刚度和摩擦因数作为优化目标,通过MATLAB数值仿真求解不同宽长比条件下滑移区和非滑移区的最优拼接轨迹。结果表明,与直线拼接法相比,选取二次方程所描述的抛物线作为滑移区和非滑移区拼接轨迹的方法使流体润滑摩擦副在摩擦因数和液膜刚度等性能指标上都有所改善,而且根据不同的优化目标参数可以方便地绘制出最优拼接方案,验证了本文方法在改善动压润滑性能上的可行性和普适性。     

定期保障模式下舰船编队携行备件配置优化

舰船编队海上任务期间,需要制定合理的携行备件方案以提高装备的战备完好性.针对海上定期保障模式下,将多层级复杂装备结构等效为单层级,提出一种备件需求分析与配置优化的近似方法,根据系统可靠性理论,建立了多阶段任务下的装备可用度评估模型,采用基于补给周期的分段求解方法.通过算例,采用边际优化算法得到携行备件优化方案,对模型结果进行了仿真验证,结果表明:模型计算结果与仿真结果吻合,两种取整方式下的方案费效比相当,采用定期保障模式能够提高备件供应效率,进一步增强备件方案的鲁棒性.     

超强筋小麦粉面包烘焙技术研究

为了烘焙出能充分表现超强筋小麦济麦229面粉品质特性的优良面包,设置了4种醒发时间处理、5种酵母和糖用量处理、4种配粉处理,对超强筋小麦面粉的面包品质进行了评价分析。结果表明,在4个醒发时间处理中,当面团醒发时间为30min和面包胚醒发时间为50min时,烘焙的面包品质最好。在5种酵母和糖用量的处理中,利用吐司面包程序时,干酵母和糖的用量分别为6g和24g时烘焙的面包品质最好；利用法式面包程序时,干酵母和糖的用量分别为3g和18g时烘焙的面包品质最好。在4个配粉处理中,200g超强筋小麦济麦229面粉中添加100g普通小麦济麦22面粉的混粉烘焙得到的面包品质最好。因此,适当调整超强筋小麦粉面包的面团、面包胚醒发时间及物料配比,可以烘焙出品质优良的面包。